| Author |
Help With sony grand vega kf-42sx300u |
Bandit1
Rank: Sony Fan
Joined: May 08, 2012
Posts: 4
From: Kirkcaldy
 |  Posted: 2012-05-08 10:04
im wondering if anyone can help
i have a sony grand vega kf-42sx300u and evertime i goto turn the tv on the green and red light flash and dosent turn on. i have ordered a new bulb but not sure if thats what the problem will be. anyone know what it can be??
thanks
|
|
mbt_junkyard
Rank: Sonyphile
Joined: Sep 15, 2008
Posts: 659
From: EU
| Posted: 2012-05-08 17:50
The lamp unit is a real possibility.
If you already ordered one, why you don't wait if this fixes the problem?
|
Bandit1
Rank: Sony Fan
Joined: May 08, 2012
Posts: 4
From: Kirkcaldy
| Posted: 2012-05-12 08:46
help replaced the lamp tv worked for 2 days now does not power up . only orange/amber light on does not power up.
[ This message was edited by: Bandit1 on 2012-05-12 08:49 ]
|
Bandit1
Rank: Sony Fan
Joined: May 08, 2012
Posts: 4
From: Kirkcaldy
| Posted: 2012-05-12 09:09
maybe i forgot to reset the lamp hours . can any one help with this thanx
|
mbt_junkyard
Rank: Sonyphile
Joined: Sep 15, 2008
Posts: 659
From: EU
| Posted: 2012-05-12 14:34
Reset of the lamp hours is not necessary for the operation of the set; it's only an indication how long the lamp has been used. I don't know it 100% sure, but I think there is a software error for the lamp timer readout for this chassis, so don't bother the value you see there.
As far as I remember, the LED lights orange when the set is "switched off" by means of the power switch on the TV. When in standby it lights red and during operation it lights green. During startup, the led blinks in green.
|
Bandit1
Rank: Sony Fan
Joined: May 08, 2012
Posts: 4
From: Kirkcaldy
| Posted: 2012-05-12 15:12
thanx mbt_junkyard strange as it seems i reset the tv with holding standby button on remote and held button in at same time on tv all up and running again.
|
mbt_junkyard
Rank: Sonyphile
Joined: Sep 15, 2008
Posts: 659
From: EU
| Posted: 2012-05-13 14:11
Glad your TV is up and running again. I think that only hitting the power button in the middle of your TV was the only thing what was needed.
If there are any problems in the future your can report them here.
|
