| Author |
kdl-40we5 |
l23agora
 Rank: Sony Fan 
Joined: Oct 30, 2010
Posts: 5
From:
 | Posted: 2010-10-30 18:24
hi forum! how to get into service mode in kdl-40we5? thanks
 
|
|
jehill
Premium Member
 Rank: Sony Senior Advisor 
Joined: Mar 13, 2003
Posts: 13796
From: Sewell, NJ
 | Posted: 2010-10-31 13:49
Welcome to Agoraquest! That doesn't appear to be the complete model number. Typically, the procedure is as follows:
1. TV must be in standby mode. (Power off). 2. Press the following buttons on the Remote Commander within a second of each other: DISPLAY ==> Channel 5 ==> Volume + ==> TV POWER .
If you are outside the USA, use the equivalent symbols on the remote.
 
|
l23agora
 Rank: Sony Fan 
Joined: Oct 30, 2010
Posts: 5
From:
 | Posted: 2010-10-31 16:03
u r right, it's kdl-40we5w, the bravia white one.
what do you man with "power off"? stand-by? how to get in?
thanks!
 
|
jehill
Premium Member
 Rank: Sony Senior Advisor 
Joined: Mar 13, 2003
Posts: 13796
From: Sewell, NJ
 | Posted: 2010-11-02 17:12
When the set is plugged in and turned off with the remote, it is in the standby mode.
 
|
l23agora
 Rank: Sony Fan 
Joined: Oct 30, 2010
Posts: 5
From:
 | Posted: 2010-11-05 17:27
hi, i managed to enter service menu, but no way to browse across the items of the menu...any hint?
 
|
jehill
Premium Member
 Rank: Sony Senior Advisor 
Joined: Mar 13, 2003
Posts: 13796
From: Sewell, NJ
 | Posted: 2010-11-06 19:35
Sure! Press the JUMP button on the remote until you get to the desired service menu, press 2 or 5 to change the category, 1 or 4 to change the adjustment item and 3 or 6 to change the data value. Press MUTING then 0 to write into memory. Turn the power off to exit the service mode.
 
|
l23agora
 Rank: Sony Fan 
Joined: Oct 30, 2010
Posts: 5
From:
 | Posted: 2010-11-07 02:36
mmhh...JUMP button...what do you mean...sorry, but probably different countries have different remote's configurations of the buttons...thanks!
 
|
jehill
Premium Member
 Rank: Sony Senior Advisor 
Joined: Mar 13, 2003
Posts: 13796
From: Sewell, NJ
 | Posted: 2010-11-08 18:43
I was afraid of that. Try skipping that step (press 1 or 4).
 
|