|
Who's Online |
| Visitors: | 174 | | Members: | 1 |
| Total of: | 175 users |
| |
| Member | Logged | | Maxxwire | 81 min |  |
| Users will be removed if they logged out or are inactive for 35 minutes |
| Visitors: | 794 | | Members: | 1 |
| Total of: | 795 online users |
| November 14, 2012, 2:44 pm |
You are Anonymous user. Register for free by clicking here.
 Inbox
Log in to check your private message
|
|
 | |
| Author |
KDF-60WF655 Service Data / PAL Settings / Light-Engine |
Surgeon
Rank: Sony Devotee
Joined: Jul 07, 2004
Posts: 84
From: USA
 |  Posted: 2006-08-25 19:08
Hey Guys,
A few technical questions about my KDF-60WF655:
Does anyone have the full service data .pdf as described on page 30 of the service manual as follows:
A complete set of the service data, Fixed and Adjustable, can be downloaded at:
http://www-ec.sdp.sel.sony.com/padics/Model_Data_List.htm
Only Sony authorized Service Technician can access this site. To request a complete list of the service data in PDF format please
contact Nita Wardlaw at clicking here)
">Nita.
(Email Address will not display unless member has 100 posts or is a Premium Member,
see the great benefits premium
member have by clicking here)
.
Also, does anyone know what settings need to be changed to allow this set to sync properly to a PAL 576I signal via it's component inputs? (I know that the composite inputs also require color tweaks, but by using the component inputs my colors are fine -- it's just that the picture rolls.) I have located the NTSC/PAL/SECM/etc settings in the NVM under the WEM2/CCPM-11 menu, and can change the PAL option to a 1, but how do I get it to "write" back to the NVM? (ENTER doesn't work here). I several PAL discs, and my DVD changers are modified to output PAL as PAL, so I'd really like to get the set to sync...
And last, I'm noticing a blue/purple hue at the very bottom 1-inch of the screen, kinda like a light-source leak. (It's only noticeable on lighter colored screen content). Does this indicate a light-engine problem?
Thanks for any help,
-Surgeon-
[ This message was edited by: Surgeon on 2006-08-25 19:13 ]
|
|
jehill
Premium Member
Rank: Sony Senior Advisor
Joined: Mar 13, 2003
Posts: 13796
From: Sewell, NJ
 | Posted: 2006-08-26 15:52
I suspect that paid SonyESI subscribers also have access to that site, but with another username and password. If you look at p-5 of the same service manual, the "Television system" is listed as "American TV standard, NTSC". This suggests that the same firmware is used for both the US/CAN models and the European models. If you can't save the PAL option as 1, I suspect that its because you don't have the hardware needed for it to be a valid setting.
-----------------
-John
Sony A/V System: KDL-55XBR8, BDP-S550, AVD-C700ES Super Audio CD/DVD Receiver, 4 SS-LA500ED surround speakers, 1 SS-LAC505ED center channel speaker and 1 SA-WD200 Active Subwoofer
|
|
|
|
| Advance
Features |
 |
|
|
|
|
|
