I have this sony rptv and the convergence will not stay/hold after i do a convergence setting thrru the service menu. after i get the adjustments done i then push the mute button followed by the enter button to write this setting into memory. after the Tv in turned off and back on the convergence is off again. any suggestions besides putting it in the shop to be checked out?
after i set the convergence and write it to eeprom,then,turn off then back on the video is excellent and very clear.
model: Sony KP46WT510 is there a program like DVE for setting the convergence? i have DVE and followed the steps one by one and now just to get the other problem cured
Joined: Mar 13, 2003
From: Sewell, NJ
Posted: 2006-06-12 11:28
Welcome to Agoraquest! Have you tried verifying that the new settings have been saved as follows?
1. After adjustment, pull out the plug from the AC outlet, then replace the plug in the AC outlet again. 2) Turn the power switch ON and set to Service Mode. 3) Call the adjusted items again to confirm they were adjusted.
Sony A/V System: KDL-55XBR8, BDP-S550 and AVD-LA2500PKG, consisting of AVD-C70ES Super Audio CD/DVD Receiver, 4 SS-LA500ED surround speakers, 1 SS-LAC505ED center channel speaker and 1 SA-WD200 Active Subwoofer
All logos and information in this site are property of their respective owner. The
comments are property of their posters.
This website www.agoraquest.com, Claudio Meira and Agoraquest, LLC is not tided in any form to the Sony Corporation
(www.sony.com). This unoffical website is just place where Sony products are reviewed among the general public. Sony is a registered
of Sony, Inc. "PlayStation", "PlayStation2", the PlayStation "PS" logo, and all associated logos/graphics.
"Agoraquest, LLC" and "agoraquest.com" are associated exclusively with agoraquest.com, and are NOT associated in ANY way with Sony
please click here. If you have any further questions, please contact using our online form.