I have change somethings in the Service Menu - no Problem. But now, a feew days later, I wanna return to the Menu (the Overscan is a little bit to smal), but It doesn't work over the way I make XXX times before (Press 5 Sec. the VCR/TV/DVD Change Button - than it's blink a feew times an the ........... etc.).
The problem is, that the VCR/TV/DVD Button doesn't blink after 5 seconds or longe - It's glow the hole time I press the button.
I hope you guys understand my problem an sorry if my english is bad, but it's late and i go to fall asleep soon ^_^
to get access to the test mode the remote has to be programmed as you did. When this doesn't work anymore, I suggest the problem is in the remote, when the TV would always respond to the 'TEST' command which is issued by a remote.
Did you try to remove the batteries of the remote, then pressing any key to ensure the capacitor inside the remote will be empty. Then remount the batteries and try to 'programm' the remote again. After the 'reset' you did by removing the batteries, this must work.
Otherwise, you can get access to the test mode in another way: Put the set in standby and press the following buttons in rather quick succession: - i+ (the one for on-screen display) - 5 - VOLUME + - TV (the button you use to return to normal viewing after using Teletext / Videotext)
The set powers up then, showing TT-- in the upper right corner of the screen.
All logos and information in this site are property of their respective owner. The
comments are property of their posters.
This website www.agoraquest.com, Claudio Meira and Agoraquest, LLC is not tided in any form to the Sony Corporation
(www.sony.com). This unoffical website is just place where Sony products are reviewed among the general public. Sony is a registered
of Sony, Inc. "PlayStation", "PlayStation2", the PlayStation "PS" logo, and all associated logos/graphics.
"Agoraquest, LLC" and "agoraquest.com" are associated exclusively with agoraquest.com, and are NOT associated in ANY way with Sony
please click here. If you have any further questions, please contact using our online form.