Title says all. If somebody can help me I would appreciatte too much...
Somebody know how to get the part number of the service manual to get it? I need the SM of TV Set KLV-32S300A Thank you! [ This message was edited by: rodfeli on 2009-12-13 12:07 ]
The option is VUSN. Typo error.
You also can try to power off the receiver while it is on muting. When the receiver goes in power on, remains muted. But, take care you ALWAYS REMEMBER this setting or you can blow up the speakers raising the volume accidentally... Rod.
Hello, For noddin0ff, jbenscoter, iczelion74, longitron: check your mails... For Alexh: Check your mail, I have a very similar model, not exactly yours... For kakaroto, oogue, will, sorry but I don't have this service manuals models... For the rest: My FTP goes run out of space, please don't more requests for downloads please... Sorry for the inconvenience... Rod.
Check your mails! Longitron: Which TV?
The subwoofer switch already exists in the 315 model. It gives more "booom" for movies and less for music...
I have the SA-VE315 model, it is a former model of 335. My experience is this speakers are very good for movies, but no so good for music. I will give a 8/10 points for movies, but only 5/10 in music. This speakers lacks middle tones. As advantage, it has a good job in general for the price you paid for them, but if you budget is a bit more generously, I recommend you the JBL NSP1's or the Titans or Accoustic Research Take 5.2... I don't know if in Holland are availability of this models... Altought, I saw the JBL's NSP1 in MediaMarkt last year during my hollidays... Good Luck! ..
Look if you TV set has an option for "Fixed Audio Output" instead of "Variable Audio Output". The variable output of this TV sets are too low...
Thanks guys! Yes, in Argentina the CATV/TV System is PAL, but the DVDs are almost all NTSC... Digital Cable (DirecTv) is NTSC also.
Hi Fabrizio, Another "Argentino" in the forum!. It seems to be more a problem with solution in the user menues (brightness/contrast/sharpness) than the service menues. Please, post your settings (1-10 scale) for this settings in the TV color system you note the failure. The VMLV (Vertical Modulation Level I suppose...) is not in the service menu of your TV set and I can found nothing similar looking for some info I have. There is not a similar settings to UPIN & LPIN in the service menu, because it is imposible to correct this defects without open the chasis of the ..
Can you post the exact model number of the TV set? I believe is missing some letter...
Hi, Please, take care with the service menu and use it as you own risk! To go in service mode in this TV you have to: 1. Press the VCR/TV/DVD until the TV light is ON. 2. Press and hold the YELLOW button for 5 seconds. The TV light flashes... 3. Press 99999, the 3 lights flashes... you are in the commander's service mode... 4. To go out from this mode, repeat setps 1-2 and press 00000. 5. Turn on the Tv Main Power Switch. 6. Press the video standby button twice. Something like "TT_...." appears in the Screen. 7. Press Menu Button. Use you ..
Have you used the same cables in this other Tv set? This other TV has the "auto-detect signal" feature also? I am refer to "micro-cuts" to minor cuts in the signal of video, human eye imperceptible, and that does that the television set re-detect the signal in the proper connection (video1/2/3)
Check your mails! 7ronko: I have not got your email... sorry... Rod.
I read on the net several docs about red push, but I a bit confused about the settings in the service menu. I know about AXIS or AXPL & AXNT (It depends of the TV model) has to be set to 1 or 0, but some info says "put this value in 0" and other info says "put this value in 1" and yikes! ... What the correct value??? Rod.
I think they are "micro-cuts" in the video signal. Check your connections or try with another cables. If the problem persists, try to connect the XBox to another TV set to see if the same problems appears. Is no way to disable this through service menu. Good Luck!
I let the VM ff for the MOVIE picture setting and use this mode when watch DVDs... I Only use VM and in LOW with CATV (analog) connections.
All logos and information in this site are property of their respective owner. The
comments are property of their posters.
This website www.agoraquest.com, Claudio Meira and Agoraquest, LLC is not tided in any form to the Sony Corporation
(www.sony.com). This unoffical website is just place where Sony products are reviewed among the general public. Sony is a registered
of Sony, Inc. "PlayStation", "PlayStation2", the PlayStation "PS" logo, and all associated logos/graphics.
"Agoraquest, LLC" and "agoraquest.com" are associated exclusively with agoraquest.com, and are NOT associated in ANY way with Sony
please click here. If you have any further questions, please contact using our online form.