Displaying results 0 to several of several search results
You can view the first 3 pages (30 results). To view all
several results. You must be an Agoraquest member with over 100 posts or a Premium Member. It's free to register and to
upgrade to Premium Membership is only $12 per year. Also there are several incredible benefits with Premium Membership
including access to over 4,000 service manuals, faster post response and access to Private Messaging our top
To view benefits, screenshots and how to easily upgrade to premium membership by clicking here
| Page Number: |
|First 650 characters of this post|
|DVD||Entering raw commands on Sony RDR-GX300/gx7 firmware dump||khronos||1||2012-01-13 12:32|
|First 650 characters of this post||Hi,See my site here for information I have gathered on the rdr-gx300:http://22.214.171.124/rdr-gx300.htmlI have several questions about this model that I am curious to know.One is, given the ability to see a command history in the service menu as shown on my site, how do you enter raw commands on this device? Does the CN103 port referenced in the service manual play a role? What format are these commands in?Another is, has anyone been able to deobfuscate this firmware: Sony-DVD-Recorder-Fir|
|Instruction and Service Manuals||Service Manual RDR-HX1010||Mr_Mod||2||2007-01-01 17:06|
|First 650 characters of this post||The RDR-HX1010 is a later series of model, the main board and firmware is completely different.
The series you are looking at had the following recorders which used the same firmware.
The US manual will be no good as it does not contain any schematics.
To get hold of the manual there are number of links where you can get them from posted on this site[addsig]|
|DVD||No video outputs on RDR-GX300||bluevince||1||2007-01-01 17:04|
|First 650 characters of this post||Hi !
I bought the RDR-GX300 (European, Zone 2) DVD recorder 2 years ago. I had no problem until now because I only used SCART Line 1 video output (either RVB or PAL composite video).
Recently I tried other outputs and I noticed that the Line 2 video outputs (both composite and s-video) and the component video out (YPbPr) didn\'t work at all. Nevertheless, the component output is activated in the system menu (and the RVB via SCART is disabled, as required by design).
I tried to enter the service mode as explained in |
|Instruction and Service Manuals||Service manual for RDR-HX900 & RDR-GX300||pvrnut||3||2006-11-26 15:12|
|First 650 characters of this post||Hi:
Would greatly appreciate a service manual for an RDR-HX900 or an RDR-GX300.
Thanks for your time and trouble.
|Instruction and Service Manuals||access||pvrnut||3||2006-11-24 11:18|
|First 650 characters of this post||Hi:When you wrote in your original post \"no DVD players\", does that meanno DVD recorders either?I am desperately in need of service manual for: RDR-HX900RDR-GX300Would be very grateful if you could e-mail either one.Thanks in advance!pvrnut (email@example.com|
|Television Installation||Component Installation||ellron||6||2006-06-14 16:46|
|First 650 characters of this post||I recently upgraded my cable box to a High definition box from my local cable company. It is a Scientific Atlanta Box model 3250. I am now wanting to rewire all my components. Each time I do this it is a bit of a nightmare and I often wonder how it all works. Listed are the various pieces that go to make up this system.Scientific Atlanta 3250 HD Cable BoxTV Sony KP-53HS10Sony FM Stereo Receiver STR-D615Sony DVD Recorder RDR-GX300Sony CD/DVD Player DVP-NC665PI would like to set it up so that I can either use the receiver for audio or if I did not want t|
|DVD||sony rdr gx-300 cant choose line 3 to view ntl decoder box||shabzy1||1||2006-05-14 18:44|
|First 650 characters of this post||hi i recently bought a sony rdr-gx300 dvd rcrdr and have read thru manual n allsorts but cant get it to pik up the signal for my ntl digital receiver box. The scart from the ntl box is connected to line 3 on bak of the dvd recorder (which is where it says that a decoder box shud b connected). A 2nd scart is then connected from the TV out scart on back of recorder to my tv.When the dvd recorder is off I have the ntl pic dislayed on my tv which shows that the loop must be right. But when I switch on the dvd rcrdr I cant get |
|DVD||RDR-GX300 went blank: can I reset it?||Athlonburner||5||2006-03-19 07:30|
|First 650 characters of this post||Hi,
I would appriciate your help on this:
Last week, I wanted to record a television show. I had not done that for some months. Although the recorder had been plugged in normally for all that time, all the channel-presets had gone.
I let the machine search for them, but it found nothing. Strange... because the television is connected to the cable through the DVD-recorder and works fine.
Yesterday, I went on trying to solve the problem. But now there is no output at all! The TV switches to the right SCART input, but the screen is blank.
The TV and the SC|
|First 650 characters of this post||I own the RDR-GX300. When I owned a directv tivo receiver I could record from my sony 55 inch fine, with no problems. I recently upgraded to a directv high definition tivo and can\'t even get a picture to show. I get the audio but no picture. When playing a dvd it works fine. Is there something special about recording from a high def tuner? I have tried recording standard channels and high def channels but nothing works. Please help?|
|DVD||RDR-GX300 not recording||rdr-gx300||4||2006-01-03 01:15|
|First 650 characters of this post||Hello,I\'m trying to install my DVD recorder but for some reason I can\'t record. It worked on my other TV but not this TV. The TV I\'m using now is an older TV but I see no reason why it shouldn\'t work. I can watch DVDs by hitting the TV/Video button. When it changes to video I can watch DVDs but when I try to record it only shows a black screen. I followed the instructions in the booklet but it doesn\'t work. I even tried different combinations with the cables and it still doesn\'t work. Can anybody help me?Thanks. [ This message was edit|
| Page Number: |