Currently Listing 20 Search Results
To view all
265 results. You must be an Agoraquest member with over 100 posts or a Premium Member. It's free to register and to
upgrade to Premium Membership is only $12 per year. Also there are several incredible benefits with Premium Membership
including access via Private Messaging to our top
members.
To view benefits, screenshots and how to upgrade easily to premium membership by clicking here
|
| Forum |
Topic |
Author |
Replies |
Posted |
| Television Troubleshooting | KP-57ws520 Need new G-Board! | geosen | 2 | 2009-11-15 23:00 |
| First 650 characters of this post | I have the KP-57WS520 and it developed the 9-blink issue. I read the posts here and ordered the two replacement diodes for the G-board. I used a solder gun to heat the diodes while waiting because I read that soldering, or applying heat, can help. It did help and the tv worked normal for several weeks. When it developed the 9-blinks again, I had the parts already. The D6301 was no problem but the D6116 worried me because it is so small. I asked a friend with a lot of soldering experience to help. He took the board but while working on it, lost the diode. I ordered another one. How |
| Television Troubleshooting | KDF-E42A10 6 Blinking lights | jehill | 2 | 2009-11-15 18:06 |
| First 650 characters of this post | Welcome to Agoraquest! For the KDFE42A10, 6 blinks, pause, 6 blinks, etc. means \"Low B error\" and the probable cause location listed is \"B_12V is not supplied (GT board). In case you want to try replacing the GT board, the part number is A-1113-732-A. The part doesn\'t appear to be available from Sony, but you might try www.tristatemodule.com. Be aware that the thermal fuse may have blown due to inadequate cooling. This could be caused by poor electrical connections to one of the fans or a clogged o |
| Television Troubleshooting | KDL40S2010 red led blinks 4 times | openagos | 2 | 2009-11-02 20:23 |
| First 650 characters of this post | I have a Sony KDL40S2010 USA television with the led blinks 4 times.I did some troubleshooting on the inverter board 1-789-500-32 and checked okay, then I checked the output voltage on the G2 board and I measured about 1.5vac. I believe I need to replace the G2 board the service manual calls for part no A1169591E but the board that is in my tv is A1169591F. I have seen vendors selling power supplys for kdl40S2010 with letters C, D, E, and F.Can I use any one of these boards? |
| Television Troubleshooting | thermal fuse replacement on kdf-55wf655 | jehill | 26 | 2009-10-25 08:36 |
| First 650 characters of this post | If you are seeing 3 blinks, pause, 3 blinks, etc. from the red standby light, it means that either the lamp module isn\'t firmly seated or that the lamp door isn\'t securely closed. If the lamp door is warped, that\'s due to overheating. You may be able to reshape it with a hair dryer, but that\'s not the real solution. You should obtain the \"Lamp door warped and possible no power condition/KDFxxWE655, KFxxWE610, KFxxWE620\" information package if your model number is listed. It addresses inadequate cooling issues t |
| Television Troubleshooting | KV36XBR450 5 blink code - parts? | jeepsteve92xj | 3 | 2009-10-23 23:04 |
| First 650 characters of this post | I have 2001 KV36XBR450. Last year I had the code 4 blink, that went away on its own just before I received the new chips. Now I have: "Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly." partsstore DOT com |
| Television Troubleshooting | Sony KV F21M8J - Blacks Screen - red light (LED) blinks 2 times | bong_koko | 1 | 2009-10-20 09:49 |
| First 650 characters of this post | Please help me diagnose the problem of my Sony Television KV XF21M8J.Following problems has been solved with this Television.1. color picture not stable, comes yellow, sometimes red, sometimes more green.2. a little bit tapping of the cover tv becomes normal and everything ok.3. if you move or tap it again, the problems comes again.4. poor solder on the jungle area.Action Taken:1. Resoldering on the jungle IC makes it clear, normal color and stable.After 2 days, another problem comes1. it's suddenly |
| Television Troubleshooting | 6 red blinking light | jehill | 7 | 2009-10-18 09:31 |
| First 650 characters of this post | Welcome to Agoraquest! For the kdf46e2000, 6 blinks, pause, 6 blinks, etc. means \"LowB LVP Thermal Fuse Open\" and the probable cause / location listed is as follows:Check 10.5V audio IC (B board).This is the starting point for a qualified service technician. I find the wording confusing. Are they suggesting to check the audio IC 10.5V input for the presence of 10.5V? I suspect so. I think that I would try replacing the thermal fuse located as indicated below:SubjectThermal fuse part number |
| Television Troubleshooting | KF-50WE610 blinks red 6 times repeats | tonyinhilo | 3 | 2009-10-14 15:40 |
| First 650 characters of this post | Sony KF-50WE610 is 5 years old. Lamp has been replaced 3 times. Now on turn on it blinks green 6 times, switches to blinking to red 6 times pauses 3 sec and repeats. By clicking the on button it goes back to blinking green then back to red and repeating this procedure it eventually latches on. This time period is taking longer now but still able to come on eventually. But my girl friend did this for 1/2 hour at one time and got to stay on.Can I get help before it blows up? |
| Television Troubleshooting | KF50WE610 6 blinks | rom11 | 5 | 2009-10-08 11:46 |
| First 650 characters of this post | HelloI have the KF50WE610 since 2004 with no problems until now...tv shuts down after few minutes and power light blinks 6 times. I bought a thermal fuse(part# 157695111, the size of a dime) from sony, removed the fan, removed the A/V, removed the optical unit, removed the second fan but I don't find the thermal fuse. I'm planing to change the thermal fuse first and then the G1 board(this is what I read in this forum). I'm not technical so please I'll need details. Thank you |
| Television Troubleshooting | SONY KV27V45 SHOWS DIAGONAL LINES THEN SHUTS DOWN. | TECHRONE | 2 | 2009-10-05 15:12 |
| First 650 characters of this post | I HAD SERVICED A SONY KV27V45 IN EARLY AUGUST. WHEN I RECEIVED THIS TELEVISION,THERE WAS NO PICTURE BUT THERE WAS SOUND.WHEN I EXAMINED THE CRT BOARD SOME COLD JOINTS WERE FOUND AND I SOLDERED THESE COLD JOINTS AND THEN MONITORED THE TELEVISION FOR A NUMBER OF DAYS, AND IT HAD WORKED SUPERBLY.THE CUSTOMER RETURNED LAST WEEK TUESDAY 29th SEP, PAID FOR THE TV AND SAID THAT HE WILL RETURN SOMETIME TO COLLECT IT.I HAVE NOT SWITCH ON THIS TELEVISION SINCE AUGUST,AND THEREFORE I DECIDED TO DO THIS ON FRIDAY LAST WEEK. THE TELEVISION WAS SWITCHED ON,IT DISPLAYED A GO |
| Television Troubleshooting | KF50WE620 red blinking light | bsnaidero | 5 | 2009-09-22 09:35 |
| First 650 characters of this post | Hi, First I want to say thanks for all the great info on the site. Now my problem. I have a SONY KF-50WE620 tv and the tv shuts off after an hour or two and the red standby light blinks. After reading on your site I started the TV in self-diagnostics mode and it shows the following: 6: +B OVP 17: AUDIO 08: DVP 0101: WDT 0 Any idea where to go from here? I' |
| Television Troubleshooting | KF60DX100 Power off and on | twurster1 | 17 | 2009-09-19 23:26 |
| First 650 characters of this post | I have a KF60DX100 and finally replaced the lamp after 21,000 hours. However the new lamp has created another problem.First the tv comes on for about 30 seconds then cycles off "no sound or light", the led light blinks 5 times. It does this cycle once or twice more then the TV works perfect for the rest of the day until it is turned off and the cycle returns. I noticed that the lamp temp was only 36~38 and then turns off. It seems that when the lamp temp exceeds 43 it works without a hitch. Any ideals of the cause. Thanks for the forum. Most helpful for maintainin |
| Television Troubleshooting | KV-40XBR800 won't turn on | daletex | 2 | 2009-09-06 13:02 |
| First 650 characters of this post | Thought I'd ask one more time before getting a fork lift to remove my Sony to the recycling yard. My 40 inch XBR800 tube will not turn on. It's been a fantastic set up till now and I am hating to loose it. But I tried one thing and it worked to get the set back on and it was crazy, using a leaf blower to blow the dust out from the back. Plugged it in and it turned on. Then the TV got turned off by mistake and now no matter how I use the blower it will not come on again. 7 blinks. Some one on this site mentioned using a lamp dimmer from Lowes' to increase the power to the set to get it to |
| Television Troubleshooting | Sony KP-51WS520 No Power, No sound, Standby light flashes 9 times | scavino | 6 | 2009-08-31 18:58 |
| First 650 characters of this post | I have read these post by searching web and I am unable to locate a G-board or the diode, the links are leading to a page that don't carry part anymore and the posts are from 2006 so its 2009 and needs some help PLSSSSSSSSSSSSSSSSSSSSSSSany help will be really appreicated as I love my TV... *************************************************************************I have a Sony WEGA rear projection TV, model: KP-51WS520Purchased November 2004When I turn it on, no power and no sound. The standby light initially flashes 10 times and then p |
| Television Troubleshooting | KV32HS420, KV32XBR400, KV32XBR450, KV36HS420, KV36XBR400, KV36XBR450 D board circuit failures | pacanchik | 98 | 2009-08-30 18:14 |
| First 650 characters of this post | Hello everyone,
I have Sony KV-32HS510 model. It will not turn on and the red light is blinking 6 times. Can someone please let me know what may be wrong. I read different posts and it seems that for some models 6 blinks mean that something is wrong with the Thermal fuse or D Board. But thats for different models I was wondering if anyone knows what 6 blinks may mean for KV-32HS510. Thanks for your help in advance. |
| Television Configuration | Sony KV-32HS510 6 times blinking Stand by mode | pacanchik | 2 | 2009-08-30 03:24 |
| First 650 characters of this post | Hello everyone,I have Sony KV-32HS510 model. It will not turn on and the red light isblinking 6 times. Can someone please let me know what may be wrong. I read different postsand it seems that for some models 6 blinks mean that something is wrongwith the Thermal fuse or D Board. But thats for different models I was wondering if anyone knows what 6 blinks may mean for KV-32HS510. Thanks for your help in advance.[ This message was edited by: pacanchik on 2009-08-30 18:16 ] |
| Television Troubleshooting | KP-61SH10 repair blunder! | doodman | 2 | 2009-08-24 14:38 |
| First 650 characters of this post | Hi! Thanks in advance for your time. Here's my story: I've got a Sony KP-61SH10. It started shutting down and blinking 5 times on the front. I removed the 'D' board to check for bad solder joints, all seemed very good so I reinstalled 'D' board. I accidentally plugged one of the connectors (CN517) one pin off center (bad lighting conditions). Anyway, a lamp on the 'D' board (NL8001) flashed and I unplugged it right away. The connector I misaligned was sending +5V to ground and -5V to the output of t |
| Television Troubleshooting | KV-40XBR800 - 7 blinks then 4 blinks after hard reset and then back to 7 blinks | fuscorayj | 3 | 2009-08-04 22:04 |
| First 650 characters of this post | My KV-40XBR800 would not power on yesterday, last night it did, this morning it was blinking 7 times, pause, blink 7. I did some googleing and heard to to do a hard reset by unplugging for 4 hrs. After 8 hours when plugged back in the set flashed white snow, went horizontal then gave a 4 blink code. I let the set sit for another 1/2 hr and tried agin, it flashed white snow again, went horizontal but is now back to blinking 7, pause, blinking 7. I originally suspected the D board based on what I have read in the FAQ's but am now wondering with the Vert stop issue as indicated by the blink 4. |
| Television Troubleshooting | Sony KP-53HS30... | theplayersamigo | 2 | 2009-08-04 17:22 |
| First 650 characters of this post | my sony KP-53HS30 standby/timer light blinks 6 times. I was told the thermal fuse and the board next to it must be replaced...$400...since I had the STK chips replaced 8 months ago at the same cost, I decided to simply replace the set with a 1080p lcd. Question: if I replace the thermal fuse myself w/o changing the board do I stand a chance at it working for any length of time for the kids game room?? before i simply put it out on the curb?? $12 fuse try before junking??? Am I crazy??Thnx in advance,theplayersamigo |
| Television Troubleshooting | KF-42WE610 - Picture and sound for 20 seconds and then 5 blinking lights | kyoujin | 14 | 2009-07-30 15:27 |
| First 650 characters of this post | KF-42WE610 - Picture and sound for 20 seconds and then 5 blinking lightsLike many others, I have a KF-42WE610 TV that started giving the Power/Standby 5 blink code. I turn on my TV and everything seems normal as I have both picture and sound. Then, after 20 seconds or so, my TV loses both picture and sound for several seconds and then everything comes back to normal for 20 seconds or less. This would repeat until I powered off the TV. During this time my Power/Standby light remains green. When I power off the TV, the Power/Standby light blink |
