|
Who's Online |
| Visitors: | 194 | | Members: | 1 |
| Total of: | 195 users |
| |
| Member | Logged | | RickeyM | 4.7 min |  |
| Users will be removed if they logged out or are inactive for 35 minutes |
| Visitors: | 794 | | Members: | 1 |
| Total of: | 795 online users |
| November 14, 2012, 2:44 pm |
You are Anonymous user. Register for free by clicking here.
 Inbox
Log in to check your private message
|
|
 | |
| Topic Review |
jtep
Sony Fan
Joined: Mar 08, 2011
Posts: 2
From: US
 |  Posted: 2011-03-08 12:10
I have a sony, model kp-51ws520 that comes on and then goes off. It's giving me a blink code 10, pauses and then blinking 10 times, etc.... This started about a month ago and is getting worst. Anyone had this problem before?
|
jehill
Sony Senior Advisor
Joined: Mar 13, 2003
Posts: 13788
From: Sewell, NJ
 | Posted: 2011-03-09 17:29
Welcome to Agoraquest! For the KP51WS520, 10 blinks, pause, 10 blinks, etc. means "HV Protection" and the probable cause locations listed are as follows:
1. Q8014 or Q8013 has shorted replace along with R8051 on D board.
2. IC8005 is damaged (D board)
These are starting points for a qualified service technician.
|
jehill
Sony Senior Advisor
Joined: Mar 13, 2003
Posts: 13788
From: Sewell, NJ
| Posted: 2011-09-13 12:26
Its up to you. If you want to save money, replace the parts. Otherwise, purchase and install a new D board. Suggest that you go to www.tristatemodule.com for board.
|
sonyawide
Sony Buff
Joined: Feb 02, 2006
Posts: 20
From:
| Posted: 2011-09-13 09:09
I currently am having the 10 blink issue on my KP-51WS520, is it easier just to replace the entire D board? or should I just replace the 2 transistors 1 Integrated circuit and the resistor that you speak of?
|
JBC71
Sony Fan
Joined: Jan 17, 2012
Posts: 1
From: US
| Posted: 2012-01-17 14:21
My KP51ws520 was giving the 10 blink code also. I replaced the (4) parts on the D board as suggested and it worked fine for one day. Then 10 blinks again. I used Sony brand parts. Any suggestions? Thanks in advance!
|
stejo22
Sony Fan
Joined: Jan 22, 2012
Posts: 1
From: Coon Rapids, MN
|  Posted: 2012-01-22 15:54
Well, now it is my turn. Just this afternoon my Sony rear projection (KP51WS520) is giving me the 10 blinks on the standby button. I unplugged the TV from the power bar and plugged back in and when I turned the TV back on I will get sound for a few seconds but no picture and then I hear the TV click off and I get the 10 blinks. I tried unplugging a few times and gave up as it kept on 10 blinking. I also took off the back panel and blew out the dust and that did not help either. After searching around on the internet, I came across this forum and it seems the problem I have is the D board. I do want to get it replaced and I was wondering if anybody could please tell me how much they think it should cost. I am in Minnesota. I did find the D board P/N A-1054-155-A at a place on the web for $111. Is it easy to replace this board? I have never repaired or worked on a TV before but was wondering if I can replace the board on my own? Thanks, Steve
|
jehill
Sony Senior Advisor
Joined: Mar 13, 2003
Posts: 13788
From: Sewell, NJ
| Posted: 2012-01-23 09:49
Welcome to Agoraquest! I would check with www.tristatemodule.com. They supply rebuilt boards and may take your board in exchange. They have a good reputation and probably can give you tips for removing the board.
| |
|
