It is currently Sat Jul 22, 2017 6:40 pm
View topic - KV36XBR400 No video repair kit
KV36XBR400 No video repair kit
Moderator: jttar
1 post
• Page 1 of 1
Hey Guys,
I just finished doing the dead kit that I got from fixyourowntv. 5 components in total, took longer than I thought. Some small "cups" ended up coming out of the board, but I believe I got enough solder in there to make a good connection. The problem I was having was a code 7. Now after it's back together, I still have no picture but I get 5 flashes. Also the tube has shut down twice while waiting to see what happens, then I get the 5 flashes. When the tube shuts down that is the only time I get something to flash around the edges of the tube.
Anybody have any idea?
Thanks
I just finished doing the dead kit that I got from fixyourowntv. 5 components in total, took longer than I thought. Some small "cups" ended up coming out of the board, but I believe I got enough solder in there to make a good connection. The problem I was having was a code 7. Now after it's back together, I still have no picture but I get 5 flashes. Also the tube has shut down twice while waiting to see what happens, then I get the 5 flashes. When the tube shuts down that is the only time I get something to flash around the edges of the tube.
Anybody have any idea?
Thanks
- canoeman
- Sony Buff
- Posts: 14
- Joined: Sun Apr 13, 2008 8:00 pm
- Location: mass/USA
1 post
• Page 1 of 1